How to Take a TV Off a Wall Mount
Taking a TV off a wall mount can be a challenge, flat-screen LED TV’s weigh between 10 and 55 pounds, depending on their size. If you have a heavy flat-screen TV, you’ll want to make sure you are two people taking it down.
If you have an Articulating/Full Motion TV wall mount bracket picture like below, it will be easier to remove since you have visibility of the back of the TV.
The more complicated type of mount to remove is the fixed TV wall mount or tilt TV wall mount.
The easiest to Remove and move around which is a TV installed without drilling any hole is the Column TV Mount also know as the Pillar TV Mount. The Column mount is the best mount if you have a circular pillar or a square column.
In this article, I am going to emphasis on 3 common types of wall mount locking mechanisms which you want to understand about before removing your TV.
Note – Before starting, try to remove all cords attached to the TV. Some cords are not removable till the locking mechanism explained below is removed.
Type 1 Locking Mechanism – Screw type
For this type of bracket, you will need a long screwdriver of at least 12″ (buy on Amazon.com or Amazon.ca) and a flash light to be able to find the screw head from the bottom of the TV. Once you have located it, unscrew both of the screws till you are able to pull out the bottom of the TV away from the wall. Once you have pulled the bottom part of the TV away from the wall, its time to unhook it from the wall part of the bracket. Please see picture below.
Type 2 Locking Mechanism- Pull String Type
The pull string technology method comes with most newer TV mounts and is easier to remove. Instead of a screw, the pull string is attached to a latch which when pulled releases the bottom of the TV from being latched to the wall mount. Carefully try to find the two pieces of string from the back of the TV bottom. Pull it hard and you will hear a click sound, subsequently the bottom of the TV will pop further away from the wall. Pull the bottom of the TV away from the wall, remove all cords attached to the TV and then unhook the TV from the wall mount.
VIDEOS AVAILABLE AT THE BOTTOM of PAGE
Pull string attach to vertical mounting plate to release latch
Type 3 Locking Mechanism – Horizontal Locking Bar.
The horizontal locking bar is used in mostly commercial space. Instead of the screw and pull string which is accessible vertically at the bottom of the TV, the bar lock is accessible from the sides, so look out in the side of the TV for a long bar which goes through form left to the right. It can be pulled horizontally out one way only, so try from both sides and Bob is your uncle. See picture below, the bar is where the padlock is.
The locking bar in this bracket is locked with a padlock
If you have more questions or need help removing your TV in Toronto. We offer services to remove and wall mount TVs. Please call us at 647-380-0876 or email us email@example.com for help.
Want to install your TV by yourself without finding studs or by just strapping your TV. Visit CONDOMOUNTS.COM for all unique hardware for easy TV install with all mounting tools and bolts included.
Looking to wall mount a TV on Metal stud or just drywall. Click here.
Looking to strap your TV to a post/pillar or column. Click Here.
Want to make you install easier please use the below TV MOUNTING DIY KIT. NO STUD REQUIRED. INSTALL YOUR SELF IN MINUTES. 200LB drywall anchors and drill bit is included. Complete your install in 15 minutes. TV MOUNTING KIT NO AVAILABLE ON AMAZON.COM AND AMAZON.CA
Shop Amazon Devices – Fire TV Trade-In Offer
Shop Amazon Devices – Get $35 Toward a New Fire TV 4K Device
Mounting TV On Ceramic Tile Includes How To Use Diamond Drill Bit To Cut Tiles, Marble and Granite
How To Mount A Grab Bar On Any Wall Using Condomounts Mounting Kit. For when studs are not available or hard to find.